(Redirected from GBrowse 2.0 Configuration HOWTO
GBrowse 2.0 is a complete rewrite of the original GBrowse version. In addition to making the code base more maintainable, GBrowse 2.0 adds the following major features:
This document describes how to install and configure GBrowse 2.0 on your system. Readers familiar with GBrowse 1.70 or earlier should start with the next section, which is a quick summary of what is different. Readers who have not installed or configured GBrowse before should skip to GBrowse Installation.
This section describes the various ways to get GBrowse up and running.
The easiest way to get started using GBrowse2 is to use one of the pre-packaged virtual machines with all libraries, tools and other dependencies preinstalled. There are two standard GBrowse VMs, one for running on your desktop using VirtualBox, and the other for running on Amazon Web Services.
Please see GBrowse2 VMs for a list of the VMs that are available to use, plus a quick start guide to using these virtual machines.
In Ubuntu versions 11.10 and higher, you can install GBrowse2 and all its dependencies from the Software Center or from the command line. From the Software Center, search for “gbrowse” and click the “install” button. You may also wish to install the “gbrowse_data” package, which includes example data files and tutorials.
From the command line, run the following:
> apt-get install gbrowse gbrowse_data
In Debian and Debian-related systems, run the following command:
>aptitude install gbrowse gbrowse_data
You might also wish to browse the GBrowse Debian package pages.
The current version in the Debian package is 2.39, which is a bit old but quite stable. The package will be updated at some point in the not-so-distant future.
In Debian and Debian-related systems, run the following command:
>aptitude install gbrowse gbrowse-data gbrowse-calign
You might also wish to browse the GBrowse Debian package pages.
First install prerequisites following the instructions at [GBrowse_2.0Prerequisites#DEB Systems (apt)](GBrowse_2.0_Prerequisites#DEB_Systems.28apt.29 “GBrowse 2.0 Prerequisites”). Then perform the last steps manually as described in GBrowse_2.0_Install_HOWTO#Installing_via_the_CPAN_Shell.
First install prerequisites following the instructions at [GBrowse_2.0Prerequisites#RPM Systems (yum)](GBrowse_2.0_Prerequisites#RPM_Systems.28yum.29 “GBrowse 2.0 Prerequisites”). Then perform the last steps using the CPAN shell as described in GBrowse_2.0_Install_HOWTO#Installing_via_the_CPAN_Shell.
Install the prerequisites following the instructions at GBrowse_2.0_Prerequisites#MacOSX. Then perform the last steps using the CPAN shell as described in GBrowse_2.0_Install_HOWTO#Installing_via_the_CPAN_Shell and GBrowse_2.0_Install_HOWTO#Configure_in_Mac_OS_X_10.6.6.
Installation from source code is described in GBrowse_2.0_Install_HOWTO#Installing_Manually.
GBrowse 2.0 is largely backward compatible with GBrowse 1.X, but you will need to do some modest work in order to port existing sources to the new system. Please see Migrating from GBrowse 1.X to 2.X for a guide to the process.
For GBrowse 1.X configuration, see: GBrowse Configuration HOWTO.
GBrowse is controlled by a set of text configuration files. You will log into the web server machine and edit these files using a text editor. Alternatively you can use WebGBrowse, which is a web-based system for initializing, configuring and customizing GBrowse databases. It is an add-on to GBrowse and should only be installed after GBrowse is up and running.
This section discusses manual editing of GBrowse’s configuration files.
GBrowse’s options are controlled by a master config file, GBrowse.conf which contains site-specific options that apply to all data sources, and one or more Data source-specific configuration files that define the options needed to create a specific genome browser.
When you installed GBrowse, it created an initial GBrowse.conf configuration file in the directory you specified at configure time. The default location of this directory is /etc/gbrowse2. This file contains two types of information:
Here is the default GBrowse.conf:
# This is the global configuration for gbrowse
# It contains setting common to all data sources as well
# as the various constants formerly scattered amongst scripts and libraries
[GENERAL]
config_base = /etc/gbrowse2 # overridden by environment variable GBROWSE_CONF
htdocs_base = /var/www/gbrowse2
url_base = /gbrowse2
db_base = /var/www/gbrowse2/databases
tmp_base = /var/tmp/gbrowse2
# These paths are relative to the url base
buttons = images/buttons
balloons = images/balloons
gbrowse_help = .
js = js
# These paths are relative to the config base
plugin_path = plugins
language_path = languages
templates_path = templates
moby_path = MobyServices
# session settings
session lock type = default
session driver = driver:file;serializer:default
session args = Directory /var/tmp/gbrowse2/sessions
# to use the berkeley DB driver comment out the previous
# line and uncomment these two
#session driver = driver:db_file;serializer:default
#session args = FileName /var/tmp/gbrowse2/sessions.db
# Debug settings
debug = 0
debug_external = 0
debug_plugins = 0
# Performance settings
renderfarm = 1
slave_timeout = 45
global_timeout = 60
# Clean up settings (used by the gbrowse_clean script)
expire session = 1M # expire unused sessions after a month
expire cache = 2h # expire cached data if unmodified for >2 hours
expire uploads = 6w # expire uploaded data if unused for >6 weeks
# Appearance settings
truecolor = 1 # better appearance at the expense of larger image files
#truetype = 1 # use truetype fonts for rendering tracks; disabled by default.
# The #include line following this one defines a transparent theme.
# Replace "transparent_colors" with "solid_gray_colors"
# or "warm_colors" for different themes.
#include "themes/transparent_colors"
balloon tips = 1
titles are balloons = 1
plugins = FastaDumper RestrictionAnnotator SequenceDumper TrackDumper
overview grid = 0
region grid = 0
detail grid = 1
image widths = 450 640 800 1024
default width = 800
pad_left = 60
pad_right = 30
too many landmarks = 100
instructions section = open
upload_tracks section = closed
search section = open
overview section = open
region section = open
detail section = open
tracks section = open
display_settings section = closed
# where to link to when user clicks in detailed view
link = AUTO
# HTML to insert inside the <head></head> section
head =
# At the top of the HTML...
header =
# At the footer
footer = <hr />
<p style="font-size:small">Generic Genome Browser version 1.99. For questions about the data
at this site, please contact its webmaster. For support of the
browser software <i>only</i>, send email to
<a href="mailto:gmod-gbrowse@lists.sourceforge.net">gmod-gbrowse@lists.sourceforge.net</a>
or visit the <a href="http://www.gmod.org">GMOD Project</a> web pages.
</p>
# Various places where you can insert your own HTML -- see configuration docs
html1 =
html2 =
html3 =
html4 =
html5 =
html6 =
# Limits on genomic regions (can be overridden in datasource config files)
region segment = 200000
max segment = 5000000
default segment = 5000
zoom levels = 100 200 1000 2000 5000 10000 20000 50000 100000 200000 5000000 1000000
region sizes = 1000 5000 10000 20000
default region = 5000
fine zoom = 10%
# keyword search maxima
max keyword results = 1000
###############################################################################################
#
# One stanza for each configured data source
#
###############################################################################################
default source = yeast
[yeast]
description = Yeast chromosomes 1+2 (basic)
path = yeast_simple.conf
[yeast_advanced]
description = Yeast chromosomes 1+2 (advanced)
path = yeast_chr1+2.conf
[renderfarm]
description = Renderfarm demo (gbrowse_slave must be running!)
path = yeast_renderfarm.conf
GBrowse.conf consists of several sections. The [GENERAL] section is the largest, and describes options that apply to GBrowse globally. Below this are one or more source-specific sections with short descriptive names like [yeast]. Each of these short sections describes a genome datasource which you will make available for browsing.
There are two include directives that allow you to break up GBrowse configuration files into smaller logically-related bits. The directive:
#include "path/to/file"
will import the file at the named path into the configuration file. Relative path names are treated as relative to the location of the configuration file. Wildcards are also allowed. For example #include “/etc/gbrowse2/conf.d/*.conf” will include all files that match the wildcard pattern. This mechanism is currently used to defined a variety of GBrowse “themes” that set page background patterns and colors.
The directive:
#exec "/usr/bin/script_to_execute"
will cause the command “script_to_execute” to be executed each time the configuration file is loaded. The output of this script will be included into the configuration file.
The [GENERAL] section defines a large number of options, most of which you will never need to change. The format of an option is the option name, an equals sign, and the value of the option. There may be whitespace before and after the equals sign. To continue long option values across multiple lines, begin the second and subsequent lines with one or more spaces or tabs; the additional whitespace will be treated as a single space. Lines beginning with the hash (#) symbol are comments. Please note that for historical reasons, some options separate words by underscores (“remember_settings_time”) and others separate words by spaces (“cache time”). The two forms are not interchangeable.
Several options take true/false values. A false value is numeric 0. A true value is numeric 1, or indeed any other non-zero value (including the word true).
config_base, htdocs_base, url_base, db_base, tmp_base
The first six options describe the location of GBrowse’s configuration
and support files. config_base is the location of GBrowse’s
datasource-specific configuration files, typically /etc/gbrowse2.
htdocs_base specifies the location of GBrowse’s static HTML files,
stylesheets and javascript libraries. url_base is similar to
htdocs_base and gives the location of same HTML files, stylesheets
and javascript libraries in URL form. So, for example, if GBrowse’s
static files are located in /var/www/html/GBrowse and this maps in URL
space to http://your.site/GBrowse, then htdocs_base will be
/var/www/html/GBrowse and url_base will be /GBrowse. db_base
describes the default location of in-memory databases. tmp_base
points to the directory used for user sessions, uploads and other
temporary files.
The config_base directive is overridden by the environment variable GBROWSE_CONF. This variable is set when Apache starts up, and can be found in /etc/apache2/conf.d/gbrowse2.conf, /etc/httpd/conf.d, or /etc/apache/conf.d, depending on how your system is layed out.
buttons, balloons, gbrowse_help, js
These four configuration options tell GBrowse where to find the images
for its navigation buttons, popup balloons, help pages, and javascript
libraries. Ordinarily you will not need to change these locations. The
default locations are subdirectories of htdocs_base. If you specify
a relative path, they will be taken as relative to htdocs_base (in
filesystem space) and url_base (in URL space).
plugin_path, language_path, templates_path, moby_path
These configuration options specify where
plugins, language translation
files, templates and
MOBY configuration files are located. If relative
paths are given here, they are taken relative to the config_base.
The default is to place them in subdirectories of config_base.
session driver, session args
These two options pass settings to the CGI::Session module, which is responsible for GBrowse’s persistent user settings. As described in the CGI::Session documentation, session driver selects the driver to be used for storing and retrieving user session information, and session args passes additional arguments to the selected driver. The default is to use the standard “file” driver. To use the faster (but not universally available) DB_File driver, the options might look like this:
session driver = driver:db_file;serializer:default
session args = FileName /var/tmp/gbrowse2/sessions.db
session lock type
Since GBrowse runs several processes in parallel, it needs to flag when another instance of it is working on session data in order to avoid another process from clobbering the same session. This option controls the type of locking to perform. Valid values are:
flock
Use standard file locking. This works fine in most cases, but can cause
GBrowse to get very slow if its temporary directory is mounted on a
shared NFS filesystem.
nfs
Use the File::NFSLock module for locking. This is fast and works across
NFS, but requires you to install the
File::NFSLock module from CPAN.
mysql
Use the locking in the MySQL database. It is handy if
you already have a MySQL database up and running. The full format of
this value is:
session lock type = mysql:dbi:mysql:my_db;host=hostname;port=portnum;user=user;password=pass
for simplicity, you can leave off the initial “mysql:”.
A value of default will choose the File::NFSLock module if it is available, and otherwise fall back onto standard flock.
This section contains a variety of performance-related settings that you may want to change in order to tune GBrowse for your needs.
renderfarm
This configuration directive turns on and off GBrowse’s support for a rendering farm (see Running a GBrowse2 Render Farm). By default this support is enabled, but there no particular performance penalty if you choose not to take advantage of it. If you plan never to use the feature, set it to a false (zero) value:
renderfarm = 0
slave_timeout
When running a GBrowse2 render
farm,
this option controls how long the master server will wait for one of its
slaves before it times out and considers the slave “down”. The units are
seconds, 45 seconds by default.
global_timeout
If a database query, search or plugin takes longer than the number of
seconds given by this option, GBrowse will time out and return an error
to the user. The default is 60 seconds.
allow remote callbacks
If this option is set to a true (non-zero) value, then uploaded and
remote track files will be able to contain configuration stanzas with
Perl callbacks. The callbacks will be executed if and only if the Perl
Safe::World module is installed
on your server. This module provides a restricted execution environment
that mitigates (but does not eliminate) the risk from untrusted code
accessing local files and other sensitive content. Note that
Safe::World does not currently work with Perl 5.10 and higher.
max_render_processes
GBrowse launches a subprocess for each track it renders. This option will limit the number of simultaneous subprocesses that can be launched in order to avoid overloading the system. The default is four; you may wish to adjust this upward on a system with 4 or more CPUs. A good choice is between one and two times the number of CPUs/cores on the server system:
max_render_processes = 8
The following options control the appearance and behavior of GBrowse. Unlike the earlier options, any of them can be overridden on a per-datasource basis in datasource-specific configuration files simply by inserting the option into the [GENERAL] section of the datasource-specific config file.
autocomplete
This is a true/false option. If true, then any databases that have the
“autocomplete” option set will be searched when the user types three or
more letters into the GBrowse search field. Proposed matches will be
displayed in a popup menu. Please see Database Search
Options for more information.
The autocomplete setting also applies to the “Custom Tracks” and “Community Tracks” sections, and allows users to search the user account database for public tracks via autocomplete. See GBrowse_Configuration/Authentication for more information on the user account database.
balloon tips
This is a true/false option. If true, popup balloons are activated such
that when the user mouses over a feature, additional information about
that feature appears in a balloon.
titles are balloons
This is a true/false option. If true, popup balloons are automatically
populated by default information about the feature unless a track has a
balloon hover option that overrides the content. If false, then you
will need to set the balloon hover option for the track in order for
balloons to appear at all.
stylesheet
This option sets the path to the GBrowse cascading stylesheet (CSS) file. This sets such options as the page background color, font size, background image, and so forth. Edit this option here to change the appearance of all data sources, or add a stylesheet option to the [GENERAL] section of datasource-specific configuration files to change the appearance on a case-by-case basis.
You can also specify multiple stylesheets by separating them by spaces or newlines. To associate specific stylesheets with different media types, place the media type(s) in parentheses and append them to the stylesheet, as in the following example:
stylesheet = css/gbrowse.css(screen)
http://www.example.com/hires.css(paper,projection)
http://www.example.com/audio.css(audio)
truecolor
If set to a true value, then the tracks will be rendered as full-color
24-bit images, improving appearance at the cost of larger images. The
effect may be noticeable on a slow internet connection.
truetype
If set to a true value, then the fonts in track images will be rendered
using truetype fonts installed on the server. A value of “1” selects a
safe default font. A string value can be used to select a particular
font, such as “Droid Sans” or “Helvetica-9”. This option only works on
versions of GBrowse from 2.55 onward, and only if Bio::Graphics 2.33 or
higher is installed.
plugins
This option selects which, if any, of the GBrowse plugins to offer to
the user. It is a space-delimited list of plugin names. Plugins are Perl
.pm modules that can be found in the plugins subdirectory of the
GBrowse2 configuration directory. Select the ones you wish to activate,
and put their in this configuration directive, minus the “.pm”
extension. See GBrowse2
Plugins for a description of what each plugin does.
overview grid, region grid, detail grid
These three options control whether the background grid should be
displayed in the overview, region, and detail panels by default. They
are either true (1) or false (0) values. The user can later turn the
detail panel grid on and off, but currently there is no user interface
for deselecting the overview and region grids.
image widths, default width
These two options control the width of the panels displayed to the user. image widths is a space-delimited list of numeric widths to be made available to the user to select from. default width is a single numeric value indicating the default width when the user first loads the browser. In this example, the browser assumes a default width of 1024 pixels, but offers the user a menu of five widths ranging from 450 to 1280 pixels.
image widths = 450 640 800 1024 1280
default width = 1024
pad_left, pad_right
These options control how much additional whitespace (in pixels) to
surround the detail panel with on the left and the right. This is
sometimes necessary for glyphs that need extra space to the left or
right for additional information. An example of this is the UCSC
multiple alignment
glyph.
too many landmarks
This option controls the maximum number of results to return when the
user performs a wildcard search on the database. The default is 100.
hilite fill
This option controls the interior color of the selection rectangle that
appears when the user clicks and drags on a scalebar, as well as the
highlighted region of the currently selected region. It accepts a
Bio::Graphics color
value, such
as “beige:0.8” for a beige background at 80% opacity.
hilite outline
This option controls the outline color of the selection rectangle that
appears when the user clicks and drags on a scalebar, as well as the
highlighted region of the currently selected region. It accepts a
Bio::Graphics color
value, such
as “red:0.8”.
hilite height
This option controls the height of the draggable region marker, which
highlights the currently selected region
overview bgcolor, region bgcolor, detail bgcolor
These three options control the background colors of the overview,
region and detail panels respectively. They each accept Bio::Graphics
color
value.
grid color, grid major color
These options control the appearance of the grid lines in the overview,
region and detail panels. The first controls the color of the minor grid
lines, and the second controls the color of the major grid lines. They
each accept a Bio::Graphics color
value.
show sources
Ordinarily GBrowse generates a popup menu showing all configured data
sources; the user can change the datasource by selecting from this menu.
To inhibit generation of this menu, set show sources to zero.
instructions section, upload_tracks section, search section, overview section, region section, detail section, tracks section, display_settings section
These options control whether a section is toggled open initially
(“open”), or toggled closed (“closed”). In addition, for the “overview
section”, “region section” and “detail section”, you can specify a value
of “hide” in which case the section isn’t shown at all. Generally this
only makes sense for the region section.
category default state
As described in the track configuration section, a track can be placed
in a category or subcategory. The categories can be toggled open and
closed. The “category state” option, described next, allows you to
configure the toggle state of each category and subcategory when the
user first accesses the page. If a category is not explicitly named,
then this option is consulted to find the default. Values are either
“open” to make each category open by default, or “closed”. For
convenience, you may use the integer value 0 for “closed” or 1 for
“open”.
category state
This option controls whether a category or subcategory is open or closed when the user first visits the page, or resets his state with the “Reset” menu choice. The format is as shown in this example:
category state = Genes open
Genes:Coding open
Genes:Noncoding closed
Categories are identified by their names; subcategories and sub-subcategories are indicated by dividing the subcategories by “:” characters. You may use “open” to indicate that a category is open at first, or “closed” to collapse it on the first page load. “1” and “0” can be used instead of “open” and “closed”.
This configures fast track panning, the ability for a user to drag/pan the details tracks back and forth to instantly see more of the image. Extra wide images are preloaded from the server to accomplish this, so it may affect the initial image load time.
details multiplier
How much extra image data to load. A value of 3.0 means that three times
the viewable image width will be loaded. The default is 1.0, which means
that fast track panning is turned off and GBrowse behaves as usual.
These settings are used by the gbrowse_clean.pl script to remove stale temporary files of various sorts.
expire cache
How long generated tracks will be cached before they are regenerated.
This speeds up page load speed for frequently-accessed pages. The format
is a number followed by a time unit, where units are s for second,
m for minute, h for hour, d for day, w for week, and
M for month. The default is “2h”, or two hours.
expire sessions
This option controls how long the user’s track configuration, which
includes which tracks are turned on and their customized settings, will
be remembered in his or her session. The format is the same as expire
cache and is set to one month by default.
expire uploads
This option controls controls how long to keep user uploaded data for
custom tracks on disk. It makes sense to keep it on disk for as long or
longer than the session. Even if the user’s session expires, he can
still get at the uploaded data if he bookmarked his session or shared
the uploaded track at any point. The format is the same as expire
cache and defaults to six weeks.
These options configure the backend database that is used to store the information that a user uploads when he or she creates custom tracks. The default is to choose a workable database system based on the Perl DBI drivers installed on the system. See Configuring the Uploaded Track Database for detailed configuration information.
upload_db_adaptor
Which database backend to use for custom tracks. Valid options are
“DBI::SQLite”, “DBI::mysql”, “berkeleydb” and “memory”. The SQLite
database backend combines great performance with little or no
maintenance, but does require the perl
DBI::SQLite module to be
installed. The memory backend requires no additional Perl modules, but
is only appropriate for very small uploads (less than 10,000 features).
The DBI::mysql backend has the best
performance, but needs additional configuration in order to make it
possible for GBrowse to create and drop databases dynamically.
upload_db_host
When using the DBI::mysql backend, this specifies the host on which the
mysql DBMS is running. (Default “localhost”).
upload_db_user
When using the DBI::mysql backend, this specifies the user that has
access to the mysql server. This user must have database create/drop
privileges for databases beginning with the string “userdata_”.
(Default “gbrowse”).
upload_db_pass
When using the DBI::mysql backend, this specifies the password for the
user named by upload_db_user. (Default no password).
admin_account
The name of the administrator account that has privileges to upload and
configure public tracks. See The Admin
Interface
for more details.
admin_dbs
The path used to store data files uploaded by the administrator named in
admin_account. See The Admin
Interface
for more details.
The next set of options toggles on or off various debug flags, enabling you to watch what GBrowse2 is doing and help the developers catch and fix bugs. Their values are either 0 (no debugging messages) or 1 (activate debugging messages). When debugging is active, the messages will appear in the Apache error log, typically /var/log/apache2/error_log.
debug
This turns on messages about general GBrowse operations.
debug_external
This turns on messages concerning the uploading and processing of
user-supplied tracks, as well as tracks fetched from remote sources via
the
DAS
protocol.
debug_plugins
This turns on debugging messages concerning the operation of GBrowse’s
user-contributed plugins.
Several options allow you to configure the behaviour of genomic regions, such as the levels of zoom you wish to offer and the largest segment of genome that it is safe to display in the detail panel.
| option | default value | description |
|---|---|---|
| region segment | 50000 (?) | NOT DESCRIBED HERE PREVIOUSLY! DOES IT APPLY TO 2.0?? DESCRIBED ELSEWHERE (If this configuration option is set, a new “region panel” will appear that is intermediate in size between the overview and the detail panel. The value of this option becomes the size of the region panel in base pairs.) |
| max segment | 5000000 (?) | The maximum size (in base pairs) that the detail panel can display. If the user tries to display a region that is too large, he will be given a message to select a smaller region. GBrowse performance degrades as the number of features per track increases, so you can use this setting to avoid making the user wait unreasonable lengths of time for the region to display. |
| zoom levels | 100 500 1000 5000 50000 100000 (?) | A space-delimited list of region sizes (in base pair) that the user can zoom through. Each zoom level will be listed in a popup menu in the navigation bar. |
| fine zoom | 10% | This option controls the increment that the user will zoom in or out when pressing the “+” and “-“ buttons in the navigation bar. |
| default segment | 5000 (?) | If the user has selected a region that is too large to display, then single-clicks on one of the scale bars, he will be centered on a region this many base pairs in length. |
| region sizes | 1000 5000 10000 20000 (?) | This option is similar to zoom levels except that the list of zoom levels applies to the region panel. |
| default region | 5000 (?) | This option specifies the default length of the region panel, in bp. |
| max keyword results | (?) | If the user does a wildcard or keyword search, this option limits the maximum number of results that can be displayed. |
Several settings in the [GENERAL] section allow you to insert fragments of HTML (including images) into the GBrowse screen. This lets you create banners and other cutomizations for visual integration with other pages on your site.
header, footer
These two options place HTML at the top or bottom of the page. Example:
header =
You can create an unlimited number of subtracks within a single major track in order to group a series of datasets that are logically linked, such as a timecourse. You can choose which subtracks to show by default and the order in which they will appear. The user can use a dialog box to select which subtracks to make visible and to reorder the subtracks.
See Creating and Managing Subtracks with GBrowse2 for full details.
This section describes how to further customize your GBrowse data sources to provide for an exceptional end-user experience.
Many configuration file options can be computed at run time by using Perl subroutines as their values. These are known as “callbacks.” Currently callbacks work with all options that can be placed in a [TRACK] section except for the “database” and “remote renderer” options. In addition, the “header”, “footer” and “html1” through “html6” options in the GBrowse.conf and datasource [GENERAL] sections accept callbacks.
You need to know the Perl programming language to take advantage of this feature. The general format of this type of option is:
option name = sub {
some perl code;
some more perl code;
even more perl code;
}
The value must begin with the sequence “sub {“ in order to be recognized as a subroutine declaration. After this, you can have one or more lines of Perl code followed by a closing brace. Continuation lines must begin with whitespace.
When the browser first encounters an option like this one, it will attempt to compile it into Perl runtime code. If successful, the compiled code will be stored for later use and invoked whenever the value of the option is needed. (Otherwise, an error message will appear in your server error log).
For options of type “footer”, “header”, and “html1” through “html6”, the subroutine is passed no arguments. It is expected to produce some HTML and return it as a string value.
For glyph-specific features, such as “bgcolor” the subroutine will be called at run time with five arguments consisting of the feature, the name of the option, the current part number of the feature, the total number of parts in this feature, and the glyph corresponding to the feature. Usually you will just look at the first argument. The return value is treated as the value of the corresponding option. For example, this bgcolor subroutine will call the feature’s primary_tag() method, and return “blue” if it is an exon, “orange” otherwise:
bgcolor = sub {
my $feature = shift;
return "blue" if $feature->primary_tag eq 'exon';
return "orange";
}
See the manual page for Bio::Graphics::Feature and Bio::SeqFeature::Lite for information on how to interrogate the feature object.
For special effects, such as coloring the first and last exons differently, you may need access to all five arguments. Here is an example that draws the first and last parts of a feature in blue and the rest in red:
sub {
my($feature,$option_name,$part_no,$total_parts,$glyph) = @_;
return 'blue' if $part_no == 0; # zero-based indexing!
return 'blue' if $part_no == $total_parts-1; # zero-based indexing!
return 'red';
}
If you need access to information in the parent of the feature (e.g. in a multipart feature), you can call the glyph’s parent_feature() method:
sub {
my($feature,$option_name,$part_no,$total_parts,$glyph) = @_;
my $parent = $glyph->parent_feature;
return 'blue' if $parent->name =~ /Blue\d+/;
return 'red';
}
The parent_feature() method was added to Bioperl on 17 April 2008. If you are using an earlier version, parent_feature() will not be available.
See the Bio::Graphics::Panel manual page for more details.
Callbacks for the “link”, “title”, and “link_target” options have a slightly different call signature. They receive three arguments consisting of the feature, the Bio::Graphics::Panel object, and the Bio::Graphics::Glyph object corresponding to the current track within the panel:
link = sub {
my ($feature, $panel, $track) = @_;
... do something
}
Ordinarily you will only need to use the feature object. The other arguments are useful to look up panel-specific settings such as the pixel width of the panel or the state of the “flip” setting:
title = sub {
my ($feature,$panel,$track) = @_;
my $name = $feature->display_name;
return $panel->flip ? "$name (flipped)" : $name;
}
If you use a version of BioPerl after April 15, 2003, you can also use references to named subroutines as option arguments. To use named subroutines, add an init_code section to the [GENERAL] section of the configuration file. init_code should contain nothing but subroutine definitions and other initialization routines. For example:
init_code = sub score_color {
my $feature = shift;
if ($feature->score > 50) {
return 'red';
} else {
return 'green';
}
}
sub score_height {
my $feature = shift;
if ($feature->score > 50) {
return 10;
} else {
return 5;
}
}
Then simply refer to these subroutines using the \name syntax:
[EST_ALIGNMENTS]
glyph = generic
bgcolor = \&score_color
height = \&score_height
You can declare global variables in the init_code subroutine if you use “no strict ‘vars’;” at the top of the section:
init_code = no strict 'vars';
$HEIGHT = 10;
sub score_height {
my $feature = shift;
$HEIGHT++;
if ($feature->score > 50) {
return $HEIGHT*2;
} else {
return $HEIGHT;
}
}
Due to the way the configuration file is parsed, there must be no empty lines in the init_code section. Either use comments to introduce white space, or “use” a .pm file to do anything fancy.
Subroutines that you define in the init_code section, as well as anonymous subroutines, will go into a package that changes unpredictably each time you load the page. If you need a predictable package name, you can define it this way:
init_code = package My; sub score_height { .... }
[EST_ALIGNMENTS]
height = \&My::score_height
It is sometimes convenient to generate datasource files programatically rather than using a static file. To do this, you can give GBrowse.conf a “path” option that uses Perl’s “piped open” syntax to read the output of a script. For example:
# this is in GBrowse.conf
[modENCODE_preview]
description = modENCODE preview database
path = /usr/local/modencode/bin/preview.pl |
The script (preview.pl in this example) must print a correctly formatted GBrowse datasource configuration file to its standard output.
[Available in 2.09 and higher] To get even more elaborate than this, you can use a regular expression as the stanza datasource name, allowing you to pass extracted subexpressions to the script. For example:
[=~modENCODE_preview_v(\d+)]
description = modENCODE preview database
path = /usr/local/modencode/bin/preview.pl $1 |
The “=~” prefix is required to turn on regular expression scanning. This will match any data source of the format “modENCODE_preview_v123” where “123” is a series of digits. The digits will be extracted using the regular expression and passed to preview.pl as an argument:
/usr/local/modencode/bin/preview.pl 123 |
You can then invoke GBrowse with any of the following URLs and have the indicated script return the appropriate data source configuration data on its standard output:
http: //your.host/gb2/gbrowse/modENCODE_preview_v1
http: //your.host/gb2/gbrowse/modENCODE_preview_v2
http: //your.host/gb2/gbrowse/modENCODE_preview_v42
If a track definition’s “link” option is set to AUTO, the gbrowse_details script will be invoked when the user clicks on a feature contained within the track. This will generate a simple table of all feature information available in the database. This includes the user-defined tag/value attributes set in Column 9 of the GFF for that feature.
You can control, to some extent, the formatting of the tag value table by providing a configuration stanza with the following format:
[feature_type:details]
tag1 = formatting rule
tag2 = formatting rule
tag3 = formatting rule
“feature_type” is the type of the feature you wish to control. For example, “gene:sgd” or simply “gene”. You may also specify a feature_type of “default” to control the formatting for all features. “tag1”, “tag2” and so forth are the tags that you wish to control the formatting of. The tags “Name,” “Class”, “Type”, “Source”, “Position”, and “Length” are valid for all features, while “Target” and “Matches” are valid for all features that have a target alignment. In addition, you can use the names of any attributes that you have defined. Tags names are NOT case sensitive, and you may use a tag named “default” to define a formatting rule that is general to all tags (more specific formatting rules will override less specific ones).
A formatting rule can be a string with (possible) substitution values, or a callback. If a string, it can contain one or more of the substitution variable “$name”, “$start”, “$end”, “$stop”, “$strand”, “$method”, “$type”, “$description” and “$class”, which are replaced with the corresponding values from the current feature. In addition, the substitution variable “$value” is replaced with the current value of the attribute, and the variable “$tag” is replaced with the current tag (attribute) name. HTML characters are passed through.
For example, here is a simple way to boldface the Type field, italicize the Length field, and turn the Notes into a Google search:
[gene:details]
Type = <b>$value</b>
Length = <b>$value</b>
Note = <a href="http://www.google.com/search?q=$value">$value</a>
If you provide a callback, the callback subroutine will be invoked with three arguments. WARNING: the three arguments are different from the ones passed to other callbacks, and consist of the tag value, the tag name, and the current feature:
Note = sub {
my($value,$tag_name,$feature) = @_;
do something....
}
You can use this feature to format sequence attributes nicely. For example, if your features have a Translation attribute which contains their protein translations, then you are probably unsatisified with the default formatting of these features. You can modify this with a callback that word-wraps the value into lines of at most 60 characters, and puts the whole thing in a <pre> section.
[gene:details]
Translation = sub {
my $value = shift;
$value =~ s/(\S{1,60})/$1\n/g;
"<pre>$value</pre>";
}
The formatting rule mechanism described in the previous section is the recommended way of creating a link out from the gbrowse_details page. However, an older mechanism is available for backward compatibility.
To use this legacy mechanism, create a stanza header named [TagName:DETAILS], where TagName is the name of the tag (attribute name) whose values you wish to turn into URLs, and where DETAILS must be spelled with capital letters. Put the option “URL” inside this stanza, containing a string to be transformed into the URL.
For example, to link to a local cgi script from the following GFF2 line:
IV curated exon 518 550 . + . Transcript B0273.1; local_id 11723
one might add the following stanza to the configuration file:
[local_id:DETAILS]
URL = http://localhost/cgi-bin/localLookup.cgi?tag=$tag;id=$value
The URL option’s value should be a URL containing one or more variables. Variables begin with a dollar sign ($), and are replaced at run time with the information relating to the selected feature attribute. Recognized variables are:
$tag The "tag" of the tag/value pair
$value The "value" of the tag/value pair
The value of URL can also be an anonymous subroutine, in which case the subroutine will be invoked with a two-element argument list consisting of the name of the tag and its value. This example, provided by Cyril Pommier, will convert Dbxref tags into links to NCBI, provided that the value of the tag looks like an NCBI GI number:
[Dbxref:DETAILS]
URL = sub {
my ($tag,$value)=@_;
if ($value =~ /NCBI_gi:(.+)/){
return "http://www.ncbi.nlm.nih.gov/gquery/gquery.fcgi?term=$1";
}
return;
}
See: GBrowse Configuration/Authentication
See: GBrowse Configuration/Balloons.
See: GBrowse Configuration/Images.
If you wish, you can enter options into the datasource config file that will described the data in a structured way. This in turn can be used by automated scripts to discover the species, genomic build, the name of the maintainer, and other descriptive information about the data source. The information is compatible with the DAS Registration server and in a coming GBrowse release will allow GBrowse instances to automatically register themselves so that users and automated scripts can easily find and extract information from the browser.
To enter metadata about a particular data source, go to the [GENERAL] section of its configuration file and enter a metadata option formatted like this one:
metadata =
-description Example GBrowse database containing information from WormBase
(www.wormbase.org) and modENCODE (www.modencode.org).
-maintainer Lincoln Stein <lincoln.stein@gmail.com>
-created 2010-1-4
-modified 2009-9-1
-authority WS
-coordinates_version 180
-coordinates http://www.dasregistry.org/coordsys/CS_DS109
-source Chromosome
-testrange I:7385068..7387651
-species Caenorhabditis elegans
-taxid 6239
The metadata option has multiple suboptions (note the required leading whitespace in front of them):
-description
A free text description of the data source. It can span multiple lines.
-maintainer
An email address for the person or mailing list to contact concerning
issues with the data source.
-created,-modified
The creation and modification date of the resource, in the format
YYYY-MM-DD.
-authority,-coordinates_version and -coordinates
These fields establish the genome build and build version. The authority
is a short prefix indicating the organization that is responsible for
the build, such as “NCBI” (human), “WS” (WormBase), or SGD (Yeast), and
coordinates_version indicates the version of the build. In the example
above, therefore, the build is described as WS180. For greatest power,
you can use -coordinates to provide a DAS registry coordinate system
URL so that software that uses the DAS system can reliably combine
tracks from different data sources. Many coordinate systems are already
registered at the DAS registry; you may
register a new one if needed.
-source
This describes the type of coordinate system used, either “Chromosome”
or “Contig”.
-testrange
This provides an example range for new users to look at.
-species,-taxid
These indicate the species name (in long binomial format) and the
NCBI taxon id.
Note that the support for automatic registration and discovery of GBrowse data sources is not available in the 2.00 release, but is expected to be added in a subsequent point release.
If you have the requisite modules installed (DBI, DBD::SQLite or DBD::mysql), then ./Build install will run a script called “gbrowse_metadb_config.pl”, which creates and initializes a user account database for managing user logins and shared tracks. If you take advantage of the user accounts feature (described in more detail in GBrowse_Configuration/Authentication), you may wish to run gbrowse_metadb_config.pl periodically. It checks for database inconsistencies, removes unused uploads, and does other routine maintenance on the user accounts database.
Over time GBrowse will accumulate unused sessions left by users who visit once and never return. Eventually these unused sessions will use up disk space and may adversely affect performance. The same issue affects custom tracks (uploaded files) and cached images.
You can clean up these files using the Unix “find” command:
cd /var/tmp/gbrowse2
sudo -u www-data find . -type f -atime +20 -print -exec rm {} \;
This will remove all files that have not been accessed for more than 20 days. Note that the command should run as the Apache web user (“www-data” in this example). The number of days is specified with -atime +20. Change 20 to some other value if you desire.
You may wish to run this as a daily cron job, either by adding it to the web user’s cron table, or by running it in root’s cron table.
More installation and maintenance tips, including support for next generation sequencing data, user accounts, and more, are given in GBrowse 2.0 Install HOWTO#Advanced Installation Topics
See: GBrowse2 REST API (section under construction)